aluminum foil tape - T-SXXP UL

CONSTRUCTION:

A 50 micron (2.0 mil) high tensile strength aluminum foil backing, combined with a high performance flame retardant solvent acrylic adhesive, protected by an easy-release silicone release paper.

FEATURES:

• Aluminum backing provides excellent reflection of both heat and light.

•Surface burning characteristic tested as per UL723 standard

•High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft facing joints and seams makes it an excellent vapor barrier.

•Service temperature range from -30° to +150°C (-22° to +310°F).

TYPICAL PHYSICAL PROPERTIES:

TYPICAL APPLICATIONS:HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

PRODUCT FORM & SIZE AVAILABLE

Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4").

Log Roll: 1200mmx 45 / 50m Jumbo Roll:1200mmx 1000m / 1200m

STORAGE & SHELF LIFE:12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.

SURFACE PREPARATION:It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.

PRODUCT USE:It is essential that the user evaluate theCMAXproduct to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure onCMAXproduct between +10 ~ +40°C (+50 ~ +105°F).

CNBM INTERNATIONAL CORPORATION