AVT Rubber Blanket with Aluminum Bars for Heidelberg SM72 - T-086

1.sheet-fed offset printing blanket, 2.offset printing rubber blanket, 3.compressible rubber blanket - details see: https://www.packinghere.com/avt-rubber-blanket-with-aluminum-bars-for-heidelberg-sm72-10041467

Use: Offset Printing	Material: Rubber	Type: Rubber blanket	Place of Origin: Shanghai China (Mainland)
Brand Name: AVT	Model Number: T-086	Speed: 8000-10000s/h	surface color: blue
hardness: 77 degree

AVT Rubber Blanket with Aluminum Bars for Heidelberg SM72 T-086

contact supplier for AVT Rubber Blanket with Aluminum Bars for Heidelberg SM72 T-086

1.Technical Data

Model	Thickness (mm)	Hardness	Smoothness	compressibility (200N/5cm)	Tensile Strength	Elongation (500N/5cm)
Sheet-fed Offset printing blanket
AVT-T081 (low speed 6,000-8,000) 3/4 ply	1.95	75°	below 0.03mm	0.2mm	above 4500N	below 1.5%
AVT-T081 (low speed 6,000-8,000) 3/4 ply	1.68	75°	below 0.03mm	0.2mm	above 4500N	below 1.5%
AVT-T086 (high speed 8,000-10,000 ) 3/4 ply	1.95	77°	below 0.03mm	0.2mm	above 4600N(5cm)	below 1.0%
AVT-T086 (high speed 8,000-10,000 ) 3/4 ply	1.68	77°	below 0.03mm	0.2mm	above 4600N(5cm)	below 1.0%
AVT-T088 (high speed >13,000 ) 3 ply	1.95	75°	below 0.03mm	0.22mm	4800N	0.70%
AVT-T088 for about 20000 s/h 4 ply	1.95	75°	below 0.03mm	0.22mm	4800N	0.70%

2. Application range

Offset rubber blanket especially for sheet-fed offset printing, suitable for different size paper.

It can be used to HEIDELBERG, MAN ROLAND, KOMORI,FUJI, MITSUBISHI, KBA, HAMADA, RYOBI, AKIYAMA and etc.

3.Installation

4. Storage

A. Keep in a cool and dry place. No sunshine. No wet.

B. Don’t fold the rubber blanket when carry and use. Keep the blankets far away from the hard and pointed things.

C. Keep them in flat; don’t be in roll, if long time no using.

Remarks:

Choose suitable blanket and remove the dirt on it with special-purpose cleanser before use. General criteria for the installation of blanket: It shall be neither loose nor tight.

Every printing press will have a torque spanner. If you hear the signal from the spanner when fastening the blanket, it implies it is just right and you should not tighten it up any more. With their own structures and performances, all the printing presses of different brands and models have their unique torque spanner.

Generally speaking, the blanket installed for the first time must be pulled again after it imprints for one thousand times.

Packaging Detail:30 meters/roll

Delivery Detail:7 days