Black PE Flim Anti corrosion Tape Anti corrosive Coating for Underground Steel Pipe Coating - T-140, T-150, T-165, T-180, T-1100, T-1130

Black PE Flim Anti corrosion Tape Anti corrosive Coating for Underground Steel Pipe Coating & Corrosion Protection - details see: https://www.packinghere.com/black-pe-flim-anti-corrosion-tape-anti-corrosive-coating-for-underground-steel-pipe-coating-10049751

Material: Plastic	Industrial Use: Chemical	Place of Origin: Zhejiang China (Mainland)	Brand Name: Ningbo Ideal
Model Number: T-140, T-150, T-165, T-180, T-1100, T-1130	Usage: PE Flim Anti corrosion Tape Anti corrosive Coating for Pipe Coating	Backing: Polyethylene PE HDPE LDPE MDPE	Adhesive: Butyl Rubber
Peel Adhesion to Prime Pipe:: 165 oz/in, 18N/10mm	Elongation:: 300%	Water Vapor Transmission Rate:: 0.2g/100in2 /24h, 0.3mg/cm2/24h	Width:: 2, 3, 4, 6, 9,12 Inch
Length:: 61 Meter	Certification: ISO9001	Other Names: Anti corrosion Tape,Anticorrosion Tape,Anti corrosive Tape,PE Tape

Black PE Flim Anti corrosion Tape Anti corrosive Coating for Underground Steel Pipe Coating T-140, T-150, T-165, T-180, T-1100, T-1130

contact supplier for Black PE Flim Anti corrosion Tape Anti corrosive Coating for Underground Steel Pipe Coating T-140, T-150, T-165, T-180, T-1100, T-1130

1. INTRODUCTION TO PRODUCTS:

Inner Tape ( Black PE Flim Anti corrosion Tape Anti corrosive Coating for Underground Steel Pipe Coating ) System Description:

The T-100 series is cold applied Anticorrosion Tape coating systems for the anti corrosion / anticorrosion of underground, underwater, and overhead pipelines. Butyl Rubber Adhesive of anti corrosive tape is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine.

Product Advantages:

Conformable to irregular shapes.
No release liner.
Established in ground history.
Complies with AWWA (American Water Works Association) C-214 standard.
Compatible with general coating systems.

T-100 Inner Tape (Anticorrosion Tape, Anti-corrosion Tape, Anti corrosive Tape, Anticorrosive Tape) series Coating Systems with AWWA C-214 Standard:

Type of Anticorrosion Tape:

T-140

T-150

T-165

T-180

T-1100

T-1130

Thickness:

(ASTM D 1000)

Total

mil

0.38

0.51

0.64

0.76

1.02

1.27

Film

0.25

0.30

0.33

0.38

0.51

0.64

Adhesive

0.13

0.21

0.31

0.38

0.51

0.63

Tensile:

27 lbs/in

31 lbs/in

34 lbs/in

39 lbs/in

53 lbs/in

66 lbs/in

Length:

60 Meter

50 Meter

40 Meter

30 Meter

25 Meter

20 Meter

Width:

2, 3, 4, 6, 9,12 Inch

Colour:

Black

Elongation:

300%

Peel Adhesion to Prime Pipe:

(ASTM D 1000)

165 oz/in, 18N/10mm

Cathodic Disbandment: (ASTM G8)

0.25 in radius 6.4 mm

Water Vapor Transmission Rate:

(ASTM F1249)

0.2g/100in²/24h, 0.3mg/cm²/24h

Water Absorption: (ASTM D570)

≤ 0.1

Volume Resistively: (ASTM E257)

2.5 X 10¹²ohm·cm

Dielectric Strength: (ASTM D 149)

40 KV

Temperature Range:

(Normal in Ground Service)

-30 to 160^oF, -34 to 71^oC

2. POLYETHYLENE PE TAPE & PRIMER APPLICATIONS:

Rust Removal > Priming> Inner Tape & Outer Tape Wrapping

2.1 Rust Removal

Steel Surface needs treating. Its quality shall reach Sa2 or St3 grade as prescribed in GB8923-88 Pre-paint Steel Surface Rust Grade and Rust-removal Grade, and it shall be dust-free.

2.2 Priming

Primer shall be stirred well before painting. An even film of primer is painted on the steel surface that is rust-removed completely and dust-free. After the primer dries up (one may feel no sticky). The steel pipe can be wrapping with tape (it usually takes 3 to 5 minutes). The primer dosage usually amounts to 80 to 100g / m².

2.3 Inner Tape (Anti corrosion Tape) & Outer Tape (Protection Tape) Wrapping

The steel pipe that is painted with primer is wrapping with tape by means of suitable devices or tools as per joint needs, and wraps the inner tape and then wraps the outer tape. Tape tensibility can be 10 to 20 N / cm. The overlapped length between beginning and end of an adhesive tape shall be no less than 1/4 circumference of the steel pipe and the total length of adhesive tape shall be no less than 100mm. each film shall be paralleled, and must not be twisted and rumpled.

3. QUALITY CONTROL QA/QC:

Mechanical Test> Plastic Test> Electric Test> Chemical Analysis> Heat Aging Test

4. CERTIFICATIONS:

ISO9001:2008

5. PACKAGING:

Covered Tape by Polyethylene sheet,and then loaded to carton.

5. TRANSPORTATION:

Logistic Department loading and transportation.

Packaging Detail:Covered Black PE Flim Anti corrosion Tape Anti corrosive Coating for Underground Steel Pipe Coating by polyethylene PE Release Liner and then loaded to carton......

Delivery Detail:45 days