Car break use oil bottle lidding foil,alu/PE film

oil bottle lidding foil, 1.Alloy:8011 Temper:O, 2.Thickness:0.020mm-0.050mm ,Width: 10-1000mm, 3.FDA,SGS, 4.Supply printing - details see: https://www.packinghere.com/car-break-use-oil-bottle-lidding-foil-alu-pe-film-10003702

Temper: Soft	Use: Food	Treatment: Printed	Type: Roll
Alloy: 8011	Thickness: 0.02-0.10mm	Place of Origin: Hebei China (Mainland)	Brand Name: ZHENGHUI
lacquered: Have primer for printing

Car break use oil bottle lidding foil,alu/PE film

contact supplier for Car break use oil bottle lidding foil,alu/PE film

Zhenghui Printing&Packing Industrial Co.,ltdSupply all kinds of oil bottle lidding foil ,food gradenon printing or colored printing foil,the detailed information is as follows:

1.Temper,Alloy: 8011O

Thickness:0.020mm-0.050mm(before coating).

Width: 10-1000mm(according to your requirement)

Core Inner diameter:76mm

Aluminum foil lacquered one side ready for printing, and the other side with heat seal-able lacquer/HSL

2.Structure: HSL/Alu foil/Primer(printable)

HSL/Alu foil/Paper/primer

3.Technical data:

Appearance	Clear;smooth;uniform coating,no more than 3 joint-points each 1000m,marked each joint-point,surface&side entangles tightly and neat. Tower-shaped, staggered &core falling free & severe damage are forbidden.
Width Deviation	±0.5mm
Thickness Deviation	±0.003mm
Pinhole	There are no dense, continual ,periodic pinhole. There are no pinhole with d≥0.3mm in 1m². The pinhole with d=0.1-0.3mm≤1 in 1m².
Printing Quality	The letter and design is correct,clear,fastness, non-fade in high-temperature heat seal process.
Printing Quality	Overprint precision ±0.5mm
Protecting Layer	Non-desquamation by adhesive tape test
Difference of Coated Volume of Adhesive Layer	≤±10%
Heat seal Strength of Adhesive Layer (N/15mm)	≥7
Rupture Strength(KPa)	≥98
Performance of Opening the Roll	Protecting layer& Adhesive layer are not agglutinate