High Temperature Hanging Tag label film - unprinted label film

High Temperature Hanging Label Material

The high temperature label material PI-002 is PI film with modified heat-resistant coatings on both side adapted in high temperature areas.

Physical prosperities

Color: Matte White

Thickness: 150 micron

Anti-shock strength: 2.4 ML/M2

Shrinking percentage: 2.5%—5.0%

Heat-resistance prosperities:

In 350°Cenvironments long time

In 500°Cenvironments short time

Mechanical Property:

Tensile Strength: 160-180 MP

Tensile Elongation: 70%

Chemical Resistance

Prosperities and advantages:

l It’s suitable for wax ribbon or UV printing with highly opaque covering of white coating.

l It is suitable for operating temperatures below 500°Cand ideal for hot-rolled steel industry in the workplace.

l The waste can be excluded automobile in joint presses.

Applications:

Identification labels in high temperature conditions

Printing and processing:

It is adaptive for UV printing and thermal transfer ribbon printing. For requirements of cutting the product, please refer to technical guidance manual. To meet production needs, each 500-meter roll allows 2 connectors. The standard storage period is as long as 12 months at 22°C, relative humidity of 50% environment. The material is recommended to process or use in 12 months after purchasing.

RoHS/Rule 2002/95/EU

The restricted substances have been presented in chapter 4 of EU RoHS Directive 2002/95/EC. The content of these substances shall not exceed the RoHS directive 2002/95/EC limits.

Storage period: It can be stored for one year in the 22°Ctemperature and relative humidity of 50% environment.

Notes:The data is from the testing, being only typical, cannot be used of special purposes. This product should be conducted comprehensive testing in end-user environment to ensure compliance with a number of special application.

Environmental Performance:Anti-solvent testing results

In addition to gasoline soak 1 hour, other test results are based on room temperature for 4 hours of immersion. Testing substrates are the stainless steel plates and the material are required to attach a full 24 hours before peeling testing in the 180°.

Like other self-adhesive materials, the product needs the user’s operational environment testing to determine whether it needs specific labeling requirements.

Thanks for your interest in our material and service.

To get quick quotation and response,please kindly mention below information in your inquiry:

1.Your application

2.Quantity

3.Your company information