JETYOUNG Cotton T-shirt Transfer Paper w/ Dye ink, pigment ink Or sublimation ink - HT-150

T-shirt Transfer Paper (for inkjet printer /water pigment ink / white t-shirt)

Size: A4, 210x297mm
Package: 100sheets /bag
Advantage:
- Transfer directly on 100% cotton cloth, no fade and no peel off while laundry.
- Comfortable, Natural and Soft.
- Suitable for Any inkjet printer with DYE ink Pigment Ink compatible.
Transfer on T-shirt & Hat… etc.

How to print?
1. Pulling out the paper by holding the edge or corner to prevent fingerprints on the glossy surface.
2. Whole white side is the printing side.
3. Before printing, make sure to set the following:
3-1 Check the nozzle of the print head is in good status.
3-2 Mirrored the image to printing.
3-3 Choose General Paper or Photo Quality Inkjet Paper
3-4 Set Best quality in driver options.
3-5 If you are using Epson Stylus C63/C80/C82 with original printing ink, reduce 25% of yellow color in driver options.
3-6 Cut it into the preferred shape
4. Wait for 20 minutes, and do not touch the prints surface.

How to transfer? (Using plain heat press machine)
1. Preheat t-shirt about 3 seconds to exsiccate humidity.
2. Put the prints face to t-shirt.
3. Set the heat press machine as below:
3-1 Temperature: 190C
3-2 Time: 13~15 seconds,
3-3 Pressure: more than 6 bar /85 psi
3-4 Wait for 5~6 seconds and take off the white paper.

** if you want a glossy surface, use the back of adhesive about 5 seconds on heat press machine. Take off the paper and DONE.

Washing cloth for the first time (after 72 hours)
1. Remember to turn over the t-shirt.
2. Wash t-shirt in cold or warm water and moderate washing powder.
3. Don’t use bleaching agents.
4. Don’t twist with force
5. Naturally dried.
6. Don’t use iron directly on the prints.

Paper storage:
1. Keep away from direct sunlight. Store under shadow.
2. Use the paper as soon as possible when opening, otherwise store it under shadow and dry place.