LLDPE Hay Bale Wrap Film - 154323561

Silage film uses linear low density polyethylene (LLDPE) and metallocene as the main material, the technology is three co-extruded casting skill. The often used colors are black, white and green. Thethickness is 20 μm to 50 μm, width is 250mm ~~ 1500mm. The main advanced characteristics of our silage films are as follows:

♦ The surface of the film with adhesive, good adhesion between the layers. The silage film is impermeable towater and oxygen so that can form the internal anaerobic environment after packaged.

♦ The silage film is resistant to sunlight (UV) damage, and can keep the pastures stable and freshafter exposed to the outdoors for two years.

♦ The silage film is opaque in which way can make sure of low light transmission and avoid heat accumulation.

♦ The silage films have sufficient strength, including: tensile strength, tear strength and puncture resistance, to ensure the silage process will not be damaged in process of packing also can maintain an internal anaerobic environment after packaged.

♦ The high load holding capacity (retention wrapped securely.)

1.GENERAL CHARACTERISTICS-

Interior diameter of the tube:78mm.

External diameter of the roll:92mm.

Length of the tube:

The filmis centered around the tube.

Meters of the roll:

2.2-Forwarding packaging.

Rolls inside carton boxes together with a brochure of handling.

Placed in vertical position,on a Worden pallet with carton sheet on the bottom,in the middle and on the top of the rolls.

Wood sheet of 10 mm on the top.

Everything wrapped with a polyethylene sheet and then everything covered with stretching film.