Luxury New Style Semi-automatic Strapping Machine - SP-02

[Product name]Low Desk Semi-automatic Strapping Machine

[Product introduce]

Introduction

This machine is with polyethylene plastic bands tied materials, mainly for the commercial, postal, railway, bank, food, medical, publications, publishing industries cartons, wooden box, paper bag, cloth pack into the packing belt, the machine can complete the automatic take-up, sealing, cutting off and out of band. And have the function of automatic stop. High working speed, high efficiency, time and labor saving packing of high quality. There are high and low two luxury models.

Main technical parameters

Feature

1, The machine adopts the new type of integrated circuit, the access type PC board to control the whole packaging action subwoofer design;
2, The whole machine combination perfect maturity, low noise, reduce the pressure of work;
3, Packing speed, each bale in just 2 seconds; transient heating, 5 seconds can make the heating piece work, into the best state of packing, power utility;
4,60 seconds to stop at the standby state packing action is completed, a new generation of electric steel sheet design;
5,Improved design, careful manufacture, wide application range, regardless of the size of the packaging, do not adjust the machine can pack;
6,The machine is a mechanical structure, part of the use of imported parts, after the blade is stable and reliable, easy adjustment and etc.;
7, The strapping table is high, operation convenience, suitable for packing lighter items.

8, No deformation characteristics of short circuit, and the packaging is applicable range is extensive;
9, Market any packing tape, width is 6 mm to 15 mm, bonding effect is best.

Advantage

1.The motor + reducer + CAM operation, completely avoid, strapping end, motor immediately stop (energy saving);

2.Nonskid stop tightening force, tooth structure glue, cutting knives of high strength, good performance, long service life;

3.The movement and control body shell to the overall beauty of aluminum alloy die-casting molding, never rust.

4.Components are produced by computer numerical control machine tool precision, mechanical operation table more downy, durability, functional;

5.Elastic band and reservoir can be self-regulating;

6.Used especially ultra-thin high quality better! Cost can reduce 30-50%.

High desk and Low desk difference

1. First of all, 2 product material and host and working principle are the same, there is no difference on the operation.

2. Major difference: High desk height 730 cm, suitable for light weight, packaging, slightly less number of people to operate, the operator can stand operation, complete packaging work; Low desk height is 450 cm, suitable for packaging of slightly heavier products, operators need to bend to the operation, or sitting, in view of the above height difference, you can measure, choose their own mode of operation.

3. The shape difference: High desk strapping machine packing belt is inside the machine, slightly in appearance and space saving; low desk strapping machine, because of reduced height, so the packing machine packing belt machine is in the side, can according to the operation site placed to arrange.

Simple method of operation:

1.The band placed in the rail plate. Note: the first part must be from top to bottom.

2.Open the right door, the band through the brake rod passes through the pulley and belt pulley.

3.The band continued to move forward, the lead can be everywhere.

4.The power line plug is inserted into the power socket.

5.Turn on the power switch.

6.Packing on the board, close to the barrier device.

7.The strap around strapping material, along with slot plug is inserted, the automatic strapping machine.

8.Strapping is completed, remove the strapping material.

9.Adjust the strap length knob, meet the needs of belt length.

10.Adjust the tightness adjusting nut, the arrival of the appropriate force of bundling.