Pharmaceutical Aluminium blister foil

farmaceuticos aluminium foil, shiney side HSL against PVC, Dull side Primered for afterwards printing - details see: https://www.packinghere.com/pharmaceutical-aluminium-blister-foil-10003452

Temper: Hard	Use: Pharmaceutical	Treatment: Coated	Type: Roll
Alloy: 8011	Thickness: 20&25mic	Place of Origin: Jiangsu China (Mainland)	Brand Name: ORI
plain: foil

contact supplier for Pharmaceutical Aluminium blister foil

Pharmaceutical Blister/Lid Foil

SPECIFICATION SHEET

Alu Blister Foil 20µ Hard Temper (DMF No.:23841)	Foil structure: Print Primer Polyurathene base Lacquer 1.5gr/m2+/- 0.5gr Aluminum 20µ hard 54.0gr/m2+/-8% Heat-seal Lacquer (Code BY-201) Acrylic vinyl coating 7gr/m2+/-1.5gr Total weight 62.5gr/m2+/-8% (total thickness 28µ +/-8%)
Description	Aluminum Foil, 20µ Hard temper, one side lacquered with heat resistant print primer, the other side heat-seal lacquered to seal to rigid PVC and PVDC sheet,in rolls, plain or printed, max 4 colour text rotogravure printing
Technical Details	Tensile strength: more than 150n/mm2 Elongation: 1%-5% Sealing temperature 180-240 degree Bond strength more than 7.0n/15mm to PVC At 160 degree,1 sec,4kp/cm2 Pores None
Reels	Cores( Paper or steel) 76mm Max reel width: 580mm
Appearance	Rolled up tightly and evenly, smooth sides, uneven difference is less than 2mm, no obvious variation or loose inner core, with no concave outside profile. No more than 1 join per 500m.
Fluorescent substance Residue Oxide Heavy Metals(Pb)	none less than 4mg/0.02m2 less than 1.0ml(Titration with 0.02M Kmn)4) less than 0.25ppm
Supplier	ORI Packaging – Zhongjin Medicinal Packaging Co., Ltd (member of Nihon Matai Group Japan)
Remark	Raw material used fulfills the current FDA 21 CFR & 175.300 Heat Seal Lauquer with code No BY-201 are listed in FDA regulation under CFR 21,175.300 and suitable for food and pharmaceutical contact application (DMF No.:23841)