PRINTING BLANKET - SM-300
Place of Origin: Shanghai China (Mainland) | Brand Name: Meiji | Model Number: SM-300 | COLOR: BLUE |
THICKNESS: 1.95mm | LAYER: 3 layers | HARDNESS: shore A 80 degree | APPLICATION: HIGH-SPEED SHEET-FED OFFSET PRINTING |
ROUGHNESS: 1.01μm | ELONGATION(500N/50mm): 0.93% | COMPRESSIBILITY(0.2mm): 1.47MPa | ELONGATION AT BREAK: 5.80% |
FRACTURE STRENGTH: 83KN/M |
OFFSET PRINTING BLANKET
1.USED:
for high-speed sheet-fed offset printing machine
suitable for thick paper printing
2.FEATURES:
1).Printing quality with long time stability,excellent screen dot reproduction
2).high-speed sheet-fed offset printing machine soft adjustable compression typ rubber blanket
3).Bars with excellent absorption
4).it is the two in the cause of the collision , wrinking, showing strong durability
5). expanding the paper selection range
3.SPECIFICATION:
1). High performance compressible offset blanket
2). The surface is superfine to guarantee high performance printing
3). Stabilizing fabrics,high blotting and low distortion,durability and stable quality
4). a wide tolerance in operating condition
5). high sensitivity,expanding the paper selection range
6). for sheet-fed offset printing and thick paper printing
7). high color retention
8). excellent screen dot, showing strong durability
4.ATTENTION:
1): before installation, please measure the thickness of blanket for adjusting the
press accurately;
2): while installation, please use the constant wrench to tighten gradually;
3): after installation, please clean the rubber surface and ready for print;
4): during the use , please often use the special solvent to clean the rubber
surface for extend the useful life.
OFFSET PRINTING BLANKET
Packaging Detail:roll in carton/ by sheets |
Delivery Detail:3-5 days |