PVC shrink film - KHPVC38

PVC Shrink film for label, Thickness: 0.025~0.08mm, Width: 200-780mm, Length: 1500m~2500m - details see: https://www.packinghere.com/pvc-shrink-film-10049261

Material: PVC	Type: Shrink Film	Usage: Packaging Film	Feature: Moisture Proof
Hardness: Soft	Processing Type: Blow Molding	Transparency: Transparent	Place of Origin: Zhejiang China (Mainland)
Brand Name: KANGHUA	Model Number: KHPVC38

PVC shrink film

PVC shrink sleeve film is made by cast technology. We can produce pvc shrink film,tubular pvc shrink film,pvc shrink sleeve and cut into small pieces.

The PVC shrink film excellent to machine printing, no wrinkles after printing. High TD shrinkage

Production range of pvc shrink film:

PVC shrink film is a heat sensitive plastic material, it could avoid printing on bottle directly, and pictures are vivid.

Our PVC shrink film is suitable for beverage and food container labels, full body labels, tamper-evident bands and cap seals.

Advantages:

-Super transparency

-Excellent shrinkability

-Highly impact resistant

-Highly water resistant

-Excellent printability

-Ultra-violet barrier

-Excellent printability

Technical data sheet of PVC shrink film

ITEMS		VALUE	STANDARD	REMARKS
Density		1.38-1.40g/cm3	GB/T 6672	——
Roll Width		100.00~960.00±3.00mm	QB/T 3632	——
Thickness		1. Thickness≤0.05mm Average thickness Tolerance:+/-0.002mm Absolute thickness:≤0.010mm among ten check points 2.Thickness≥0.05mm Average thickness Tolerance:+/-0.003mm Absolute thickness:≤0.012mm among ten check points	GB/T 6672	Check 20 dots(horizontal) use a micrometer
Shrinkage property	MD	0%≤MD≤5%	QB/T 3632	100°C,1min,in water
	TD	46%≤TD≤52%		100°C,1min,in water
Tensile strength	MD	≥42.0Mpa	GB/T 1040	Test speed 100mm/min, gauge Length 25mm
	TD	≥50.0Mpa
Elongation at break	MD	≥70%	GB/T 1040
	TD	≥50%
Surface		Transparent and bright. No apparent mist, air bubble, dot, impurity, strip and abrasion	QB/T 3632	Keep the film facing the light, Remain parallel the eyes and the film
Smooth		The surface of the film should be smooth and without apparent pleat,floucing and drop edge	QB/T 3632	Get 4 meters film, straighten both ends
Beeline		The double sides of the film should be in line, no apparent curve. To test the 4 meters film, folioing the film, the tolerance of the double edges should be less than 2cm	QB/T 3632	——
No. of joints		No more than 2 joints per roll. Joint spacing no less than 300 meters	QB/T 3632	Double sides of joints stick with tape
The others		Negotiation	——	——
Storage conditions: Shrink films are sensitive to high temperatures.We recommend storing in original packaging at room temperature below 25°C not directly exposed tosunlight and humidity. Layflat quality may deteriorate after long storage Dependent on film type, roll length and storage conditions. Usage within a period 3 months after the indicate production date is recommend.