Tela Backlit - NL-BL-510

Soft lighting box fabric has excellent mechanical performance .The surface is very
smooth and all kinds of processing methods can achieve a terrific effect It hasexcellent anti-tension and anti-shock performance The ink absorbing is stableand strong, which can extend the life-span High strength and elasticity, easy to operate It can make the billboard which can be standing even on the top of a skyscraper for keeping a firm Position and good image to meet any weather conditionsand outside shockSoft lighting box fabric has excellent chemical

stability, itis with special processing and treating technology. And it has such advantage as anti-ultraviolet ray.

This banner material is a flexible PVC material with a highly tear-resistant polyester fabric embedded between two white layers of vinyl. The product is water-resistant and has a matte surface for no-glare signs and banners.

TECHNICAL PROPERTIES

Caliper/Gauge: 15.5 mil Ink: Solvent & Eco-Solvent
Weight: 440g Opacity: 100%
Adhesive: N/A Gloss (60_): 2
Availability: 38", 50", 54", 60", 72", 84", 98", 126" Denier Strength: 500Dx500D (GB13002-1991)
Tear Strength: 156 (T2581-1994) Tensile Strength: 950 (GB13002-1991)

Fire Retardancy: Less than 3 sec burn using test method NFPA 701 (DIN 4102, Class B1
Printing Environment: 60_-80_ F, 50% Relative Humidity
Ideal Storage Conditions: 70_ F, 50% Relative Humidity in original packaging
Shelf Life: One year at Ideal Storage Conditions

APPLICATION GUIDELINES

"Printing Tips:
Solvent and Eco-Solvent based inks are recommended of this media. An ICC profile is also recommended with proper printer settings. Allow image to dry 24-hours before exposure to water or moisture. It is recommended to disable built-in cutter blades on printers equipped with this feature. Heavy material can cause cutter failure and print head jamming."

"Finishing/Mounting Recommendations:
Pressure sensitive or liquid laminate recommended. Before lamination, please allow image to dry for 24 hours. This media may be grommeted. Standard high-tack banner tape can be used for added strength and reinforcement. Sewing the material can scratch or pick off coating. If sewing is desired, it is recommended that the material be double stitched hem side up with a maximum of five stitches per inch. Half moon wind slits are recommended for banners that are 10' or larger. Corner reinforcements, professional installer and proper installation tools are strongly recommended."

"Main Applications:
Indoor/Outdoor banners, Tradeshow displays, Booth banners, Long-term signage

High Quality PVC printing produced on a wide format solvent based machines. Up to 5m height in single piece. This creates a high impact grand scale long lasting visual display. Printing on a High Quality 550gsm reinforced PVC and nickle plated eyelets. This solution gives various benefit: