thermal printing ctp plate - H-CP

HUACAI THERMAL CTP DATA DETAIL

TechnicalData

Plate:Non-ablative thermal positive plate with optionalpostbakingforextremelylong runs

with normal and UV inks.

Coating Color:Intense Blue

Thickness:0.15,0.20,0.25,0.30mm

Sensitive Wavelength:800-850nm

Photosensitivity:50-55mw/1000RPM

Dot reproduction:1%-99% at 240lpi (2400dpi)

Laser Energy:130-150mj/cm2(mJ/cmvaries based on plate setter manufacturer)2

Run Length:120,000-150,000 impressions unbaked.

500,000-1,000,000impressions after post baking.

(Actual run length may vary according to press, ink and paper condition.)

Plate Developing Condition

Recommend Developer:HUACAI developer or Kodak or Agfa developer

(Fuji Developer is not suitable)

Developing Temperature:23+/-2degree Celsius

Developing Time:20-25s

Detailed Information

Post BakingConditions:Apply baking gum before baking

Static Oven:220-230°C for a duration of 5 - 8 minutes

(Actual oven settings may vary accoring to oven conditions.)

PlatesetterCompatibility:Kodak Trendsetter, Kodak Lotem, Kodak Magnus, Screen PT-R,

Heidelberg ,Topsetter, Suprasetter and Luscher Xpose!

Safe Light:Ordinary indoor white light

Shelf Life:18 months under recommended storage conditions (Unopened plate packs should

be stored flat and away from excessive cold ,heat andhumidity≤65%,

temperature≤30°C,stacking height less than 1.5 meters)

Package:Available in all standard formats including bulk Packaging options:

0.30mm-50pcs/carton;0.25mm-50pcs/carton;

0.20mm-50pcs/carton;0.15mm-100pcs/carton;