UHMW-PE Plastic Sleeve for Gig Conveyer - UHMWPE plastic sleeve

UHMW-PE plastic sleeve:, 1. Virgin-made, 2. Easy-machining, 3. ISO9001, UHMW-PE plastic sleeve - details see: https://www.packinghere.com/uhmw-pe-plastic-sleeve-for-gig-conveyer-10027261

Material: UHMWPE,Virgin UHMWPE	Type: Sleeves	Place of Origin: Henan China (Mainland)	Brand Name: AYCG - UHMW-PE plastic sleeve
Model Number: UHMWPE plastic sleeve	Density: 0.94-0.96g/cm3	Colour: Customized by customers	Way to production: Thermoforming
Extra machining requirement: Available	Sample requirement: Welcome

UHMW-PE Plastic Sleeve for Gig Conveyer UHMWPE plastic sleeve

contact supplier for UHMW-PE Plastic Sleeve for Gig Conveyer UHMWPE plastic sleeve

Anyang Ultrahigh Industrial Technical Co., Ltd produces professionallyUHMW-PE plastic sleeve for gig conveyer

A.UHMW-PE plastic sleevedescription

UHMWPE material has exceptionally low coefficient of friction offering superb sliding properties and is one of the best plastics for wear/abrasion resistance meanwhile tough and impact resistant even at cryogenic temperatures. As a result, it is definite thatUHMW polyethylene is a wonderful engineering plastic that can solve many problems that other engineering plastics cannot.

B.Characteristics forUHMW-PE plastic sleeve

1. UHMW exhibits virtually no water absorption

2, Non-Toxic

3. Low coefficient of friction

4. Corrosion resistant

5. Abrasion and impact resistant

6. Wear Resistant

7. Dielectric

8. Weatherproof

C.Application Areas ofUHMW-PE plastic sleeve

1. Textile Industry:

2. Chemical Industry:

3. Food Processing Industry:

4. Paper Industry:

5. Material Handling:

6. Farm Implement:

7. Mining & Metals Processing Industries:

8. Transportation:

9. Consumer Products:

10. Waste Water Treatment:

D. A parameter table forUHMWPE

Property	ASTM Test	Units Metric (US)	Typical Values
Specific Gravity	D792	gm/cm°	0.926-0.934
Tensile Strength @ Yield	D638	MPa (PSI)	21 (3100)
Tensile Strength @ Break	D638	MPa (PSI)	48 (7000)
Elongation @ Break	D638	%	350
Young's ("E") Modulus (23°C)	D638	MPa (PSI 10⁵)	690 (1.0)
Young's ("E") Modulus (-269°C)	D638	MPa (PSI 10⁵)	2970 (4.3)
Izod Impact Strength (23°C)	D256(1)	J/m (ft-LBS/in notch)	140 (30)
Izod Impact Strength (-40°C)	D256(1)	J/m (ft-LBS/in notch)	100 (21)
Hardness, Shore "D"	D2240	-	62-66
Abrasion Resistance	(2)	-	100
Water Absorption	D570	%	Nil
Relative Solution Viscosity	D4020	dl/gm	2.3-3.5
Density		(lbs./cubic in.)	.034