UHMWPE Plastic Sleeve for Gig Conveyer - UHMWPE plastic sleeve

UHMWPE plastic sleeve:, 1. Virgin-made, 2. Easy-machining, 3. ISO9001, UHMWPE plastic sleeve - details see: https://www.packinghere.com/uhmwpe-plastic-sleeve-for-gig-conveyer-10027472

Material: UHMWPE,Virgin UHMWPE	Type: Sleeves	Place of Origin: Henan China (Mainland)	Brand Name: AYCG - UHMWPE plastic sleeve
Model Number: UHMWPE plastic sleeve	Density: 0.94-0.96g/cm3	Colour: Customized by customers	Way to production: Thermoforming
Extra machining requirement: Available	Sample requirement: Welcome

UHMWPE Plastic Sleeve for Gig Conveyer UHMWPE plastic sleeve

contact supplier for UHMWPE Plastic Sleeve for Gig Conveyer UHMWPE plastic sleeve

Anyang Ultrahigh Industrial Technical Co., Ltd produces professionallyUHMWPE plastic sleeve for gig conveyer

A.UHMWPE plastic sleevedescription

UHMWPE material has exceptionally low coefficient of friction offering superb sliding properties and is one of the best plastics for wear/abrasion resistance meanwhile tough and impact resistant even at cryogenic temperatures. As a result, it is definite thatUHMW polyethylene is a wonderful engineering plastic that can solve many problems that other engineering plastics cannot.

B.Characteristics forUHMWPE plastic sleeve

1. UHMW exhibits virtually no water absorption

2, Non-Toxic

3. Low coefficient of friction

4. Corrosion resistant

5. Abrasion and impact resistant

6. Wear Resistant

7. Dielectric

8. Weatherproof

C.Application Areas ofUHMWPE plastic sleeve

1. Textile Industry:

2. Chemical Industry:

3. Food Processing Industry:

4. Paper Industry:

5. Material Handling:

6. Farm Implement:

7. Mining & Metals Processing Industries:

8. Transportation:

9. Consumer Products:

10. Waste Water Treatment:

D. A parameter table forUHMWPE

Property	ASTM Test	Units Metric (US)	Typical Values
Specific Gravity	D792	gm/cm°	0.926-0.934
Tensile Strength @ Yield	D638	MPa (PSI)	21 (3100)
Tensile Strength @ Break	D638	MPa (PSI)	48 (7000)
Elongation @ Break	D638	%	350
Young's ("E") Modulus (23°C)	D638	MPa (PSI 10⁵)	690 (1.0)
Young's ("E") Modulus (-269°C)	D638	MPa (PSI 10⁵)	2970 (4.3)
Izod Impact Strength (23°C)	D256(1)	J/m (ft-LBS/in notch)	140 (30)
Izod Impact Strength (-40°C)	D256(1)	J/m (ft-LBS/in notch)	100 (21)
Hardness, Shore "D"	D2240	-	62-66
Abrasion Resistance	(2)	-	100
Water Absorption	D570	%	Nil
Relative Solution Viscosity	D4020	dl/gm	2.3-3.5
Density		(lbs./cubic in.)	.034