uv offset White watermark ink - SY01

Details:

uv offset White watermark ink PW-SY01

After being printed,Anti-forgery Ink the paper has the same effect as watermark paper. Due to its low cost and the watermark design can be easily identified below light source without any special apparatus, it has been widely applied in printing certificates and manuals.

Color:Black,White

1,Suggest use new ink roller, or use reducer agent to cleanout the ink roller downright.(reducer agent 3-4 branches)

2,In order to make the ink don’t adhibit to machinery, every bisect printing machine must accede quarter wetting powder in water;

3,Such as printing effect is not ideal, can be used in the ink roller hair dryer blowing gently on a minute;

4,This ink will have a slight corrosion on the PS, such as the shutdown after a reboot to replace the PS, the printing more difficult, we must combine printing technology;

5,If the temperature is low not be appropriate to put ink, we can properly add offset watermark expert melody ink.

6,1 kg ink can be printed about 6,000 sheet of paper

Screen-White Watermark

1,Screen-White Watermark needs to add 300-500g solvent when printing ,mixing into aquiform ink.

2,advice : use 420 item screen printing , if dense, add to 30-50 thread.

3,1 kg ink can be printed about 1200 sheet of paper.

4.use 700 impregnant to dilution.

5,Must dry the impregnant for 3-5 hours after printing, or the ink will spread to make the lathework fuzzy.

Screen-Black Watermark

1,Screen-Black Watermark is printed between two pieces of carbon paper,use 350 item screen printing forme.

2,print on the back of paper if the paper is single-side , use 420 item screen printing forme.

3,so as to approach the effect of watermark paper ,can add to 30-50 thread on the edge of lathework.

4,use 700 impregnant to dilute.

2. Detection by the European standard EN71-PART3

3. Detected by the U.S. ASTM F963-07

ISO 9001:2000 certified

5 ISO 9001:2000 certified

6. Certified by ISO 14001:200

7. Certified Green Partner (GP)

8 by the Canadian Hazardous Products requirements