xunda pipe anti corrosion tape - T 100 200 300 400 600

Excellent adhesion to pipe and self, Resistant to UV, Can be applied over a wide temperature range, Good conformability - details see: https://www.packinghere.com/xunda-pipe-anti-corrosion-tape-10048137

Material: PE	Type: Corrosion protection coating	Place of Origin: Shandong China (Mainland)	Brand Name: XUNDA
Model Number: T 100 200 300 400 600	Color: Black,White	Thickness: 15 mil to 40 mil	Width: 2'' to 32 ''
Length: 100 ft to 600 ft	Main market: Middle-East,Asia,South America	Manager system: ISO 9001,ISO 14001,OHSMS 18001	Test report: SGS
MOQ: 100 rolls	Application: pipeline coating

xunda pipe anti corrosion tape

Composition: It is tape-shaped anticorrosion material made of Polyethylene film heat laminated with adhesive layer of butyl glue.

Usage: It is extensively used in the pipework of oil and natural gas transportation, petrochemical industry, electric power, metallurgy, urban natural gas network of pipes, the outside anticorrosion project of the metal pipes involved as well as the outside anticorrosion project of the underground and overhead metallic conduit of the works of petrochemical industry, natural gas and coal transportation

tape for wrapping gas pipe
Thickness: 0.30 - 1.30mm
Width: 50, 75, 100, 150, 230, 300mm
Length: 30 - 200m
Features:
Excellent adhesion to pipe and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D1000 Standard
Cold applied
Application:
Prepare surfaces by removing all loose scale, rust or other foreign matter by grit blasting or wire brush. Surface must be clean, dry and free of grease. Apply thin film of Butyl Primer to all surfaces to be wrapped and allow to dry. Peel back interleaving and apply adhesive side of the tape to the surface and press down. Apply the tape spirally with enough tension to make it conform. Remove interleaving as wrapping proceeds. Overlap each turn by at least 1" or 55% to achieve double thickness.